BSB-Lan
The BSB-Lan integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] integrates BSBLan
BSBLan is a device that is made by Frederik Holst and with
the help of many other contributors.
The board v3 is designed for an Arduino Due with an Ethernet-Shield for web-based controlling
of heating systems such as Elco Thision, Brötje and similar systems.
Also, available is an ESP32 version of the board.
It can interface with the heating system over Boiler-System-Bus, Local Process Bus and PPS (Punkt-zu-Punkt Schnittstelle)
For more information of which system it supports, take a look at their documentation
Configuration
To add the BSB-Lan device to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select BSB-Lan.
-
Follow the instructions on screen to complete the setup.
For authentication HTTP authentication using a username and password, or using a passkey is supported. Use either one.
For more documentation of the BSBLan device, check the manual
To see a more detailed listing of the reported systems which are successfully used with BSB-LAN, please follow the corresponding link:
The integration is tested with the stable firmware version 3.1.6-20230327101530. A newer firmware version may not work because the API could have changed.
Please use this release. release 3.1